Development blog

Development blog

DAC done & dusted! May 3, 2016

As usual, GTT's Bill Parish put on a cracking show at AXPONA. Congratulations to all involved!

GTT, Mola-Mola, YG, Kubala-Sosna & Air-Tight: Another Oasis Award

GTT, Mola-Mola, YG, Kubala-Sosna & Air-Tight: Another Oasis Award April 29, 2016

As usual, GTT's Bill Parish put on a cracking show at AXPONA. Congratulations to all involved!

GDAC update June 1, 2015

Whew! Production of the DAC boards has finally started but production of the USB input module is delayed. What this means is: if you're very impatient we can actually sell you a Makua with a DAC (or fit a DAC in your existing Makua) if you can live with only an AES or SPDIF input. The input module can be retrofitted later.

Mola-Mola / Vivid / Luxman room lands PFO Oasis Award at Newport Beach June 1, 2014

Positive Feedback Online editor David Robinson instituted the Oasis award a couple of years ago to honour those demo rooms that stand out by sounding truly musically involving. This year that accolade went to the On A Higher Note room. Truth be said, despite Philip's occasionally unconventional methods he invariably manages to get absolutely great sound and almost all visitors went out of their way to tell us that "he's done it again!" It is also gratifying that the products made by 'objectivist' engineers like Vivid's Laurence Dickie and myself are becoming recognized for their ability to convey musical emotion.

Feels Like Christmas Time April 28, 2014

A full 2 months late our new metal supplier finally shipped 3 cases for sign-off. Yes, we're grumbling now but as they say, a few years hence we'll just look back and smile. Feels Like Christmas Time Next thing is to build up these 3 sets and note any items that may need correcting and then, finally, ordering the first full batch of 50 sets. Either I can't believe it's taking so long or I can't believe it's finally moving...

Battling for Every dB January 3, 2014

Life’s been way too interesting in the lab to sit down and report on the progress of the DAC. For the past few days I’ve been trying to find ways to force the Audio Precision to measure reliably to around -140dB. So far the only thing that has some impact is manually setting the input range a few notches higher. Otherwise, no luck. So this is where we are now. Battling for Every dB The distortion spectrum at higher frequencies looks pretty much the same so I’m going to spare you a clutter of graphs. I’ll post a full report later once the last firmware wrinkles are ironed out. But as a word of warning here’s an illustration of something I mentioned in the previous DAC post. Battling for Every dB The blue graph is the same as above. The red graph is what you get if you make the common mistake that both manufacturers and reviewers can be seen to commit: to convert the whole signal to digital without notching out the fundamental first using the distortion analyzer. Clearly the red graph would have looked precisely the same even if the signal had been perfect. Every distortion product is dominated by the analyser’s 10-year-old ADC chip. I’m mystified as to how people think they can design a high end DAC if they can’t see the effect circuit changes have on the low-level stuff. Of course using the notch filter only improves matters to a degree. It is not distortion free either, just a lot better. In particular with the second and third harmonic I have no way of judging what they are in reality. Probably a goodish bit better than -130dB. The higher order ones can be chalked up to the DAC, that much I’m certain of. But at least we can conservatively conclude that this prototype has a full scale THD+N of -127dB (0.000045%) and probably lower. Uncharted waters.

8 Ears at GTT December 14, 2013

Johan Cruijff (Yogi Berra’s Dutch twin brother) once said that “every disadvantage has its flip-side.” Well that’s what’s been happening at Mola-Mola the past few months. Every day the casework gets delayed is another day to refine what’s going inside even further. So this week Philip O’Hanlon (of On A Higher Note fame), Joe Kubala (of the eponymous cables), GTT’s Bill Parish and myself got together in Bill’s office to take stock of the latest developments and do some tweaking as required. I should note that what Bill calls his office is really a place that most people would be proud of to have as their main listening room. You can get an impression in this PFO article The speakers in our test were the new YG Acoustics Halle. I’ve got something of a weakness for effectively designed 3-way speakers and boy do these hit the sweet spot.
On the agenda were a switch-mode power supply for the preamp, the finalized phono stage and the prototype of the DAC. For me the power supply was a big thing: with all options fitted the preamp was running warmer than the power amps which is more than a bit ironic. Well the SMPS fixed that. So then the question: how did it sound? Well, straight out of the lab the SMPS performed commendably but in terms of openness and air it fell noticeably short of its linear counterpart. This rather changed after adding a C-multiplier circuit to the output (that’s a kind of linear regulator but with minimal voltage loss). That tweak not only restored the resolution of the original unit but it introduced a poise and even-handedness in the tonal balance that the linear supply couldn’t match.
Those who follow my career will know that I’m not a great vinyl collector. As a result I was most anxious to hear how the purely technically engineered phono stage would hold up against competing products that had benefited from years of listening and tweaking. Well in short, it smoked ’em… The most outstanding sonic feature of the Mola-Mola phono stage is absolute consistency in presentation across the whole spectrum and a soundstage that remains uncluttered without trading in low-level detail.
Finally the prototype DAC was fired up and pitted against a $80k player synched to a Grimm clock. This was by far the most intriguing test in that the differences were surprisingly slight. The choice of digital filter made itself known in the lack of “splash” in the leading edges, and more generally as an “analogue” feeling on the part of the Mola-Mola. I’ve always been struck by the fact that even though a trumpet is made of metal, it never actually sounds metallic in real life. Quite logical when you think of it of course, it’s the air that makes the tone not the metal. But still I got reminded of that when switching from the reference back to the Mola-Mola and the metallic edge disappeared leaving the beautifully rounded tone of that magical piece of brass. The reference responded with slightly juicier lower mids but we couldn’t agree on whether this was truer to the recording or not. I think we have a winner here. For me that had always been the plan of course but the other guys felt that this DAC is already too good merely to squirrel away inside a preamp as a plug-in board. Especially when you consider it’s eating up 20W and comes as a stack of 4 boards, enough to fill a whole chassis. Long story short, I’ve overshot the target and the first Mola-Mola DAC to come out will be a standalone unit.
I’d have loved to have the DAC ready for showing at the CES but I think there are better ways of driving myself -or Bart for that matter- crazy. In terms of physical construction it’s just not ready for showtime but qua performance it shows all the promise I was hoping for.

DAC news September 13, 2013

The design work on the DAC is paying off,and Bart’s heroic microscopic tinkering even more so. Here’s an FFT taken at full scale (suppressed fundamental, more about that later). DAC news The second and third harmonics are more or less where I know the AP2722’s residual distortion to be. What remains is a minor smattering of higher harmonics. As incredibly low as they are, we still want to be shot of them before we start mass production. It’s mostly a matter of pride, we’re unaware of DAC makers claiming the kind of performance we're already getting.
On the grounds of power dissipation in the analogue stages we’ll have to differentiate the DAC into two models. The one we’re doing now is for the preamp option and has an SNR of 130dB (132dB “A” weighted) which still constitutes a record. For a later standalone product we can go flat out, at the expense of over 10W extra dissipation. Distortion performance will be similar for both (i.e. impossible to measure). DAC news A minor note to prospective audio reviewers: I cringe every time I see a distortion FFT with the fundamental still present. The ADC in the AP is not at all bad, but it is not up to par with the Mola-Mola or even with the current crop of competing DACs. You really have to run the signal through the AP’s notch filter first like I did on the plot above. Not doing so ultimately leaves you with a distortion plot of whatever Cirrus Logic chip they’ve got in there. With this DAC you’ll still be ultimately limited by the test instrument but at least the result will be closer to the truth.

Box woes September 6, 2013

By now you’ll probably have noticed that delivery keeps slipping. This is not because of the electronics - the optionless preamp and the power amps have been finished for a long time. It’s the chassis. Apparently Mola-Mola’s industrial design department (yours truly) has come up with a shape that’s really sexy but incredibly critical in terms of manufacture and finish. Everything shows. We’ve burned two prospective chassis suppliers so far. A popular saying round here is “third time right” and #3 certainly looks the part. They’re busy making the extrusion die so first off tool samples should be round the corner soon.

A late show update and some afterthoughts. June 19, 2013

Newport was a good show. As usual Philip had some amazing recordings lined up. The digital highlight must surely have been the two Brahms dances that Channel Classics' Jared Sacks had added to a recording session on the spur of the moment just a month earlier. On tape there was Roy Gaines & Anthony Wilson. Quite a few people rushed out to get a copy after hearing it in our room. All sold out in the first two days of the show. On vinyl Philip managed to lay hands on Doug McLeod's newest, "There Was A Time". So that sold out too.

I also got invited by a charming fellow called Peter Roth to take part in a round-table discussion between amplifier designers. The others were Jim White of Aesthetix and steve McCormack of SmC. Probably the most thought-provoking question that got asked was to give a run-down of advantages and disadvantages of our respective technologies. It's an interesting one because it's clearly framed to fit the quintessentially American preoccupation for "balance". You line up pros and cons so that nobody comes out looking silly regardless of which way they choose.
That kind of balance is often illusory. What are the pros and cons of class D? For once in a live discussion I didn't fumble the answer, which went something like this: whom are you asking? If you're asking the user, keep in mind that they've just bought a small, light amplifier that wastes little energy, has lots of power reserve, sounds great and generally does what it says on the tin (clearly I'm assuming a good class D amp, I believe I make those). I can't think of any disadvantages from a user perspective. Provided the class D amp is fully mature, there is literally nothing on the "con" side of the balance.
Any and all disadvantages land squarely on the designer's shoulders. Class D is an astoundingly complex technology. If you want to do it well, prepare for a lot of math. There are virtually no rules of thumb of the sort "tweak x and y will improve". When you move to class D you get good efficiency straight off the bat. The rest are problems: "how do I make it bullet-proof?" or "how do I prevent RFI" and most importantly "how do I get great sound?". In many linear amps, especially FET and valve based ones, the distortion is to a large degree euphonic so if the design of a good error control system gets overwhelming there's always the escape route of leaving the distortion in and claiming that this sonic footprint was what you were after all the time anyway. Class D offers no such cop-out. The open-loop distortion of a class D amp is not particularly interesting sonically so your only option is to eliminate it completely. That's right: the only good sound you can get from a class D happens to be "identical to the input signal". Well isn't that what high end audio should be about anyway?
The question "what are the pros and cons of class D" throws an interesting philosophical curve-ball at the whole idea of "balance". The user gets al the pros, the manufacturer gets all the cons. I suppose that's why users pay manufacturers so the principle might be a general one.

What has Mola-Mola been up to? May 7, 2013

The Mola-Mola project was kicked off in January 2012. Jorrit Mozes camped down in our lab in Belgium to design the case work while I sat down to do schematics and PCB’s. Prototypes were assembled in April and first shown in May at the 2012 High End Show in Munich.
Everyone loved the sound and the aesthetics. After-hours shootouts for potential distributors showed that the units punched far above their weight, with much more expensive products not even putting up a modicum of resistance.
The fly in the ointment came as I slid our preamp proto (later baptized Makua) into a rack for one such demo. To understand my befuddlement you ought to know that said rack space had just been vacated by what I’d call a glorified variac but what was probably a “autoformer-based passive preamplifier”. It had two big knobs, one for source (three positions) and one for gain (twenty-four 2dB steps). Rotating them took considerable force and both went alarmingly clunk as one did so. It was, in other words, esoteric. And its distributor had just asked me whether Makua had a remote control.
Here’s the mistake I made in not including one. When a product looks like it’s been designed in a basement decked out with Buddhist paraphernalia and the electrical circuitry (such as it may contain) is a highly intimate statement of one’s most personal artistic genius, nobody asks for a remote control. One doesn’t question High Art and demand that it be practical. But as soon as some degree of engineering is evident, like the presence of an actual gain stage or the absence of distortion, the product becomes pedestrian and it’ll have to use the zebra crossing like anyone else. My second mistake was telling people that production hadn’t already started. “Oh but in that case you should definitely add a balance control. And a mono switch. And extra outputs. And actually you can’t do without an iPhone app because remote controls get mislaid.”
Looking back I must admit those people were right though. Owing to their feedback the Makua has matured inestimably. Internal construction has become extremely neat and uncluttered. Signal routing is programmable, all jumpers have been eliminated. The Bluetooth receiver doubles as a wireless audio input when a DAC is installed. The volume control now uses relays, resulting in better tracking and lower distortion than a motorized potentiometer could have offered. The discrete amplifiers have become phenomenally good and stable. But it has added a full year to our schedule. It was worth it.

Woe was me (DAC saga IV) April 20, 2013

A tiny overlooked detail. Sharcs have at best 40-bit “extended precision” floating point numbers. PC’s use 80 bits. Even after subsampling to a few kHz the ratio estimator ran headlong into precision problems. And that is already using a state variable filter (don’t even try that with a direct form filter). Ever tried programming double precision using a single precision floating point processor? Nope, neither has anyone else on Google. It’s actually not possible, not like in fixed point where you can just break down a long word into shorter ones. But I did find you can do error shaping when you’re slowly integrating a small number. Contact me privately should you stumble on this blog whilst looking for a solution. Anyhow it’s all s&d now on the DSP firmware end. Bart has just finished gerbers. It’s going to be a long hot summer.

DAC saga, part III March 30, 2013

At this point I should tell you that we’ve been joined by a new boy called Bart who has been taking an enormous amount of work off my hands. This DAC is going to be as much his work as mine. So far he’s coded the PWM algorithm onto a Sharc DSP and started the board layout of the analogue stage. It seems I’ve been woefully optimistic in my original cycle estimate. One channel of PWM uses up the best part of a complete DSP chip. The very minimum DSP chip count for a stereo DAC will be 3. I suppose this is good, because a lot of DSP’s in a DAC has always been good for bragging rights.
On my end the asynchronous upsampler is working, at least in M code. First you get 4x upsampling, then an 11x7 filter yields coefficients for a 6th order polynomial which is exact to around the 30th bit. Within the audio band though it’s closer to 34 bits. Good enough I should think. The ratio variable stabilizes (reasonably) at 1 bit per doubling of lock time. Apart from the inband ripple that was actually why I didn’t want to use an SRC chip. At best their ratio estimator’s bandwidth is around 10Hz which still allows a fair bit of jitter in. Ours is in the microhertz region after a few minutes.

Op amp intermezzo March 10, 2013

A propos of nothing. If you should ever start designing op amps, will you please keep in mind that every inverting stage (every common emitter stage including current mirrors and diff pairs) has an inherent right-half-plane zero. The reason I’m saying this is because all standard literature seems to think that only the transimpedance stage (painfully misnamed VAS in audio circles) has this problem. Nope, twice nope, thrice nope. The reverse capacitance of any device acts as a noninverting feedthrough over a nominally inverting amplifier. And since the time constant is defined by the cob and gm, degenerating your input pair might well make it the dominant source of phase shift.

DAC saga, part II March 2, 2013

The PWM algorithm works! It looks exactly like I imagined it would, except that somehow imagination did not paint in all the details. Ow. For the few who follow this (oh hi Lars), the goal is to run a filter at a 3.125MHz reference frame (the PWM rate) while the PWM transitions that encode the signal and the shaped noise are moving about between the samples. After an estimate is made of the crossover point based on the signal alone, a look-ahead estimate is made of the filter states at that point in time. Then the crossover point is corrected, rounded and the filter states bumped up by precalculated amounts found in a lookup table. See? Told you it was simple. Now I just need a few missed nights of sleep to catch up with.

Volume control tsores February 2, 2013

Just for the record. Forget capacitors. Potentiometers is where all the trouble is. Those who remember the old leaflet (now taken down) may note our proud use of a P&G pot. Credit where credit is due: it is extremely good. Sadly, they couldn’t do a motorized version so it had to go. So one of our distributors pointed us to a Japanese brand that makes motorized pots for a variety of audiophile companies. That should have rung alarm bells but sadly only after designing them in I discovered that they distorted. Less so than the highly reputable amplifiers that they were put to use in, but too much to be sure it’d be inaudible. So I’m down to relays and fixed resistors. I found something that works quite nicely with no glitches. It’s really smooth. It costs about the same as the P&G pot, so all in all we’re in the money.
Did you know that some relays produce significant amounts of distortion? Take a reed relay (any brand, I tested Coto) and apply a current through the contact. If you measure across that contact you’ll see a fair amount of distortion as frequency goes up. It’s caused, I realise now, by the fact that reed relays are magnetic and the signal current sets up a changing field in the reeds. Although I still have doubts about the claims made by prophets of iron-free chassis, it seems that it certainly pays to keep iron some distance away from the signal path if there’s a fair bit of current flowing.

DAC: Sounds like another saga coming January 7, 2013

For several years now I’ve been promising people that I’d design a new DAC based on the ripple-compensated PWM scheme. Much has happened since it was first published ( The most important bit is the realisation that this modulator transforms almost trivially to its z-domain equivalent using impulse invariance. All it took to design a modulator for said new DAC was to define an elliptic high-pass filter with stop-band at 87kHz and the coefficients for the control loop come rolling out after a few more lines of MATLAB code. DAC: Sounds like another saga coming (While I’m writing this a correspondent pointed me to a fairly insane white paper by a chap who seems to claim that since the Sabre chips physically convert at 6 bits, it can’t be good for high end audio. What twaddle. Somehow someone must have been on another planet when noise shaping and dynamic element matching were invented. Information theory tells us that 6 bits at 48MHz is ample to fully encode the spectrum of anything you could conceivably call audio while noise shaping theory tells you exactly how to go about it.)
I think what we’ll do is run this modulator at a PWM frequency of 3.125MHz quantized at 100MHz. A full PWM cycle then fits a 32-bit shift register. Summing the outputs through 32 equal resistors already eliminates most of the outband energy so we should be able to get away with a fairly standard I/V topology. Since each tap alone carries the full signal, resistor matching is not at all critical.
Writing a good asynchronous upsampler for a DSP should not be rocket science. The only seriously tough nut would be shoehorning the modulator, which integrates samples at 100MHz, into a 400MHz DSP. I have some ideas. Later.

Falling trees, their sound unchanged. August 30, 2012

Mola-Mola is not exactly the first company claiming to leave the sound untouched. One way or another, virtually all designers believe that their particular philosophy is best suited for transmitting all of the information in the sound. So why do their methods differ so much, and why do their deeply held beliefs regarding some basic technologies (transistors, fets, valves, analogue, digital) often flatly contradict those of other designers who profess the same goal?
“Revealed preference” is what economists call voting with one’s feet. If you want to know what someone really wants, study their behaviour and ignore what they say. After a new design checks out in the lab the vast majority of audiophile designers set it next to an older design (theirs or someone else’s) and listen alternately to both using music that they’re familiar with, in a room they’re familiar with and with ancillary equipment that, well, has been with them for a bit as well.
I don’t think I’m misrepresenting anyone’s practice here. But there’s something fundamentally wrong with this idyll. No, not the use of one’s favourite room and speakers. That makes perfect sense. Look again, then I’ll help.
Here’s the problem. The hidden assumption is that the comparative listening test will somehow reveal which of the two DUT delivers the truest signal. How can this be if you don’t know what the input signal sounds like? At best comparing two boxes will tell you which produces a signal that to you sounds most like the internal platonic ideal you’ve built up over the years. Reviewerese has words like “warm” and “musical” which are overtly subjective. Much more treacherous though are terms like “transparency” or “precision” that do precisely the same thing – label the listener’s subjective experience – while very much contriving to suggest a more objective observation. Psychologists studying aesthetics have known for a long time that platonic ideals of perfection are formed by averaging. This has been famously shown for human faces using morphing but it holds just as well for audio kit. So someone who subscribes to the view that negative feedback is evil will preferentially listen to low-feedback amplifiers and come to get used to their idiosyncrasies and absorb them into their platonic “ideal amplifier”. If you hit that sweet spot for a given reviewer, you hit the jackpot. The above would seem academic to most. It would to me too if the solution weren’t so blindingly obvious. There is no need to compare, say, two preamplifiers and guess which one is more right. Why not compare the input signal with the output signal? It’s as simple as this:
Take one preamp of which you want to know what it does to the sound. Call that the “device under test”. Carefully set the volume control of the DUT to unity gain. Then, use a second preamplifier (the “monitor pre”) that you’ll use as a selector and volume control. Using a Y split cable, feed the source into the DUT and into one input of the monitor pre. Feed the output of the pre under test into another input of the monitor pre.
Set the volume of the second pre to a comfortable level, put on some music and do a comparative listening test just like you’d ordinarily do. But instead of comparing which you like most, concentrate on how similar or different the two are. The smaller the difference, the more accurate the pre under test. Of course instead of a pre you could test an AD/DA converter. Or a power amplifier (with a dummy load and a resistive divider at the end).
The monitor pre doesn’t have to be identical to the DUT. Perhaps it’s even better if it isn’t. And since it’ll always be in circuit we don’t really care whether it’s perfectly neutral either since the only differences that will turn up are caused by the pre under test.
Those differences can be quite instructive. Often as expected the stereo image does shrink and some impact is lost but equally often I’ve heard devices whose output signal at first appeared to sound more pleasing, spacious and detailed than the input signal. Invariably though after longer listening the effect began to pall and became that of a condiment indiscriminately sprayed onto every dish.
When you’re testing preamps a second attraction of this test is that you can repeat it with the two boxes swapped. This way you can take two completely unknown preamplifiers and still work out which of the two is most transparent. You don’t need a “reference preamp” because the reference is the input signal, not another pre.


- Sign up to get the NEWSLETTER -

iOS App Android App